150w Street Light Housing Wholesaler Introduces The Installation Process Of Street Lights

150w Street Light Housing Wholesaler describes how to install street lights:

1. The installation height (from the light source to the ground), the elevation angle, and the installation direction of the street lights in the same position should be consistent.

2. The longitudinal centerline of the lamp installation should be consistent with the longitudinal centerline of the lamp arm. The horizontal horizontal line of the lamp should be parallel to the ground, and there should be no skew visually after tightening.

3. The lamp holder is firmly fixed, the adjustable lamp holder should be adjusted to the correct position according to the design, and the lamp holder wiring should comply with the regulations

4. All kinds of nuts should be fastened with gaskets and spring washers.

Through the above introduction, Die-Cast Housing Factory hopes that you can simply refer to the content of this article in future use.