50w Street Light Housing Suppliers Share Street Light Installation Details

50w Street Light Housing supplier introduces basic street light practices

1. Measure and pay off:Use the total station to release the center line of the road according to the coordinates shown in the general plan of the road construction, and release the center line of the street lamp pole according to the center line of the road. The distance between the center line of the street lamp and the curb is 500mm.

2. Excavation of foundation pit:Excavation of the foundation pit according to the construction drawings of the foundation, the excavated soil confirmed by Party A and the supervising engineer that the part used for trench backfilling is stored on both sides of the trench, and other excess soil is transported out. The excavation of the foundation pit is carried out manually, and the construction is carried out in strict accordance with the operating regulations to ensure that the soil structure of the bottom of the tank is not disturbed. A part of the soil layer is reserved at the bottom of the tank for manual cleaning and leveling.

3. Pouring:When the foundation is poured into concrete, the anchor bolts and embedded pipes should be installed firmly and accurately in position to ensure that the bolts are installed vertically. The rust should be removed before installation, and the bolts should be coated with butter and wrapped to prevent damage to the threads. The installation level error of the foundation casting flange is not more than 1%. After the concrete is poured, the surface of the flange should be wiped clean and there should be no foreign matter such as water mixed residue. After the concrete is poured, cover the grass curtain and sprinkle water for curing in time, and the curing time is not less than 7 days.

The above content is compiled and shared by the LED Street Light Housing | Die-cast Aluminum Light Housing manufacturers , hoping to help those in need.