Air-source Heat Pump
Nowadays, the standards of people’s living are improving, not only to install air-conditioning, floor heating, and better-conditioned homes,but also to install ventilator, dehumidification and other equipment. A person with insights who is more environmentally conscious, and also install solar energy products,such as Solar water heaters, Solar power generation systems, etc.
Product
As a result, the ceiling was filled with pipes, remote controls, older people who could not adapt，and equipment filled the balcony. Could there be a device that can take these problems one step at a time? Now, after many years of research and development and experimentation, the multi-functional constant humidity and temperature machine of Thenow enterprise can integrate heat sources or cold sources at the same time, and achieve one machine multi-use, high energy efficiency, and low energy consumption by using solar energy driven or dual-cooled source capillary pipe networks.
Thenow energy recovery ventilator heat pump is developed for energy-saving buildings, which can intelligently control the temperature and humidity, and provide fresh clean air constantly. Adopting split design, this ERV heat pump is divided into the indoor unit and outdoor unit. Combining of full heat recovery technology, air source heat pump, and carbon dioxide air quality detection technology, its energy consumption will be ultra low.
Features of ERV Heat Pump:
Variable frequency DC compressor
External DC motor and internal EC motor
PLC intelligent control system with 485 interfaces and wi-fi module
With heat recovery section and heat returning temperature section
Using positive pressure, avoid water leakage
Brass material condenser, efficient heat dissipation, and anti-corrosion
Automatic operation with dehumidification, cooling, heating, ventilation
Air purification: pre-filter + medium filter + HEPA filter, eliminating PM2.5 and VOC
Vacation mode is workable
Two-stage electronic expansion valve
Technical Data of Energy Recovery Ventilator Heat Pump:
Item
Unit
VHSN-5-GS01
Control Temperature
℃
20~24
Control Humidity
RH
45~60%
Air Flow
M3
350
Rate Cooling Capacity
kW
5.2
Rate Heating Capacity
kW
6.3
Cooling Input Power
kW
1.48
Heating Input Power
kW
2.1
Rate Dehumidification
L/D
120
Rate Motor Power
W
200
Outer Static Pressure
Pa
120
Noise
dB(A)
≤40
Input Voltage
V
AC 220 / 50Hz / 1N
No.of Compressor
个
1
Connection Duct Size(Air duct/Liquid duct)
mm
12.7 12.7 9.52
Injection Refrigerant(R410A)
kg
2.3
Weight(External/Internal)
kg
35/150
Internal Unit Dimension
mm
1600*680*315
External Unit Dimension
mm
840*365*550
