Aluminium Oxide Strip Wheel Abrasive Drum (AO)

Aluminum oxide is a popular choice among industrial professionals because of its fast cut-rate and long life. This mineral makes a tough, durable abrasive that self-fractures to expose fresh cutting edges, whereas traditional natural abrasives dull more quickly. Due to its fast cut rate, hardness, and strength, it is widely used in grinding applications in addition to sanding and finishing applications.

Aluminium Oxide Strip Wheel Abrasive Drum (AO) Grit Size Table Corresponding To Raw Materials

Aluminium Oxide Strip Wheel Abrasive Drum (AO) Strip Wheel Abrasive Drum Size Table

Aluminium Oxide Strip Wheel Abrasive Drum (AO) Specification:

Max. RPM: 7000~10000 RPM

Outer Diameter: 100mm/115mm/125mm/150mm/180mm

Center Hole Diameter: 16mm/22mm

Other Raw Materials: Silicon Carbide (SC)

Aluminium Oxide Strip Wheel Abrasive Drum (AO) Materials that can be worked:

Aluminium

Cobalt-based alloys

Other non-ferrous metals

High-temperature-resistant materials

Nickel-based alloys (e. g. Inconel and Hastelloy)

Bronze

Hard non-ferrous metal

Titanium

Titanium alloys

Copper

Soft non-ferrous metal

Brass

Zinc

Stainless steel (INOX)

Grey/nodular cast iron (GG/GJL, GGG/GJS)

Annealed cast iron

Thermoplastics

Elastomers

Fibre-reinforced duroplastics (GRP, CRP)

Hardened, heat-treated steels over 1,200 N/mm2 (over 38 HRC)

Steel, cast steel

Aluminium Oxide Strip Wheel Abrasive Drum (AO) Applicable Industries

Applications

Surface work

Roughening

Cleaning

Aluminium Oxide Strip Wheel Abrasive Drum (AO) Applicable Industries

Safety Warning of Aluminium Oxide Strip Wheel Abrasive Drum (AO)

Instructions:

Safety Warning of Aluminium Oxide Strip Wheel Abrasive Drum (AO)

Please try to choose an operation indoor environment and wear protective guards and goggles.

Never exceed the recommended maximum permitted rotational speed for safety reasons.

In order to have a good stock removal rate, quality of surface, and thermal loading on the workpiece, the best performance would be with a recommended cutting speed of 15-20m/s.

Don’t push and increase the pressure during the processing to achieve a finner surface looking, but try to switch to different grit flap wheels.

Safety Warning:

The clamping length between shank and grinders should be more than 15mm.

Never exceed the maximum safe speed when the shank is extra long. Try to consult your sales to check the safety rotating speed before use. 

https://www.keyingabrasives.com/products/aluminium-oxide-strip-wheel-abrasive-drum-ao/