Bed Elevator Manufacturer Introduces Elevator Repair Steps

Bed Elevator Manufacturer introduces the precautions for elevator construction

1. During the operation of the elevator, do not hang the cable on the outer frame while investigating. Also pay attention to whether there is any abnormality in the operation of the equipment. If there is any abnormality, stop immediately, and notify the repairer immediately, stop the operation during the repair, and use it normally after the repair is completed.

2. When the construction elevator runs above and below, stop using the stroke limit as a stop switch, and still use the stroke switch for control.

3. The elevator is suspended under heavy rain, heavy fog, and wind above the sixth level. And stop the elevator on the first floor and turn off the power supply. When using it again, check the switch and limit.

4. After the elevator is operated, lower the ladder cage to the bottom layer, adjust the switch to the zero position, turn off the power supply, and pull down the ladder cage door on the bottom and bottom to escape.

The above content is organized and shared by China Home Elevator Factory , hoping to help those in need.