Bed Elevator Manufacturers Share Elevator Maintenance Methods

Elevator words are very, very common in our lives. Elevators require constant maintenance. As everyone knows, many people will ignore some precautions for elevator machine room maintenance. The elevator machine room is a place where maintenance personnel often have to stay, so everyone should pay more attention to the environment of the machine room. The following Bed Elevator manufacturer will introduce to you the elevator maintenance knowledge of the machine room environment maintenance. What needs attention?

1. Free entry for idlersThe computer room should be managed by maintenance personnel, other non-professionals should not enter at will, and the computer room should be locked and marked with the words “the computer room is heavy and free for idlers”. The equipment room must ensure that there is no possibility of rain and snow intrusion, and should ensure good ventilation and heat insulation. Dehumidification should be kept neat, dry, dust-free, and corrosive gases. Except for the tools and equipment necessary for inspection and maintenance, there should be no other items. Cleaning and lubrication of elevator car guide shoes. Everyone knows that the guide shoe runs on the guide rail and there is an oil cup on the guide shoe. In order to prevent the passenger elevator from generating friction during operation, the oil cup must be refueled and the guide shoe cleaned regularly, and the car should be cleaned. Maintenance of elevator hall doors and car doors. The faults of elevators are usually on elevator hall doors and car doors, so pay attention to the maintenance on hall doors and car doors.

2. The fire extinguisher must have

A fire extinguisher capable of extinguishing electrical fires should be installed in the equipment room. When the elevator is not used for a long time, the main power switch of the machine room should be turned off. Except for the elevator equipment specified in the hoistway, debris shall not be stored and water-piped gas pipes shall be laid. The shaft should be kept clean and tidy, and there should be no tower dust or dust. After the repair, the elevator should be tested for several times and confirmed to be correct before being put into operation. If the elevator has been replaced with important parts, it should be tested several times. Put it into operation after confirming it is correct, and make relevant records.

3. Matters needing attention for maintenance

In addition to the elevator car must be docked on the B2, B1 floor and other upper floors, the daily maintenance and repair of the elevator (lamp replacement, repair of buttons in the car, etc.) must be opened to the bottom floor (B3, B4 ) Before performing the relevant operations. After the elevator maintenance is completed, the elevators to be maintained should be tested for several times to confirm that there is no abnormality, and then put into official operation. If you need to power off the elevator during maintenance work in the machine room, you should carefully confirm the corresponding power switch and then pull the brake to avoid the emergency stop of the elevator caused by misoperation. For elevator failure reporting, maintenance personnel should carefully check the elevator failure. Avoid the situation that the real problem does not solve the problem of elevator failure again or failure expansion.

The above content is organized and shared by Fuji Hsed Elevator Factory , hoping to help those in need.