• $10000

Bed Elevator Supplier Introduces How To Use Elevators Reasonably

There will be some minor problems in the use of the elevator. These minor problems must be found out in time and eliminated as soon as possible, otherwise it will affect the normal operation of the elevator. Let’s follow the Bed Elevator Supplier to find out:

 

1. The power supply voltage does not meet the operation requirements of the elevator, and the relay will have intermittent contact, which will cause the elevator to rise and fall intermittently. The input voltage should be adjusted in time.2. Mechanical stuck, the rotating part of the elevator is not lubricated enough to cause the stuck jitter phenomenon should be timely lubricated.3. The load surface is large, and the center of gravity of the goods will definitely be shifted. In addition, equipment with a large table surface generally needs to be equipped with more than 3 oil cylinders. Due to the problem of the center of gravity of the platform, the force of the cylinder is uneven, and the speed of the hydraulic oil entering and returning will inevitably be different. In this way, the platform may shake or tilt.4. Poor oil quality will also make the pressure in the oil cylinder of the tubing pumping station unbalanced, and cause table problems. Or the oil quality that has been used for a long time has problems, or something else is mixed into the oil. After the oil quality deteriorates, a small amount of blockage can occur in the oil pipe, so that the pressure in the oil cylinder is not the same, and the lifting speed must also be affected.Through the above introduction, China Bed Elevator Supplier hopes that you can simply refer to the content of this article in future use.