China Home Elevator Exporter Introduces How To Repair Elevators

China Home Elevator Exporter describes how to repair elevators?

1. Elevator installation and maintenance workers must undergo skill training and operation training, have passed the inspection of the competent authority, and obtain a special type of work safety operation certificate before they can operate independently to prevent unlicensed work.

2. When the elevator workers are maintaining the elevator, they must not work after drinking, work illegally, do not take risks, and do not work rough.

3. When elevator maintenance workers hoist lifting equipment and materials, it is necessary to strictly abide by the all operating procedures for working at heights and lifting.

4. Check things carefully before construction. If something fails, slips, cracks, or corners, etc., it must be corrected or adjusted.

5. When operating, it is necessary to use your own labor protection supplies accurately, and stop wearing undershirts, shorts, and bulky clothes for operation. The labor protection supplies spared by the group must be kept by special personnel and checked regularly to ensure that they are in perfect condition.

6. Whenever an open flame is needed during work, it is necessary to inform the application unit to do a good job of fire prevention measures at the scene. After the open flame work, you should carefully check the fire hazards on the scene. Note: Use kerosene when using blowtorches, and stop the use of gasoline.

7. Before using the mobile device, you should check whether the metal shell is effectively grounded, whether the shell and plug are damaged, and prevent the use of wire exposure, insulation damage, leakage and other electrical devices. The mobile lamp should use a 36V low-voltage power supply to prevent use. The 220V power supply must not be directly plugged into the socket with a thread.

8. When using a soldering iron, it should be placed on a shelf or other non-combustible objects, and it is forbidden to place it on wires or wet places. After the soldering iron is used up, it can be stored after cooling.

9. After the elevator hall door is removed, it is necessary to set up obstacles and hang eye-catching symbols on the hall door, and have a special person to take care of it before placing any obstacles.

Through the above introduction, China Home Elevator Factory hopes that you can simply refer to the content of this article in future use.