China Industrial Sprocket Company Introduces The Conditions Of Chain Lubrication

China Industrial Sprocket Company introduced the conditions of chain lubrication.

A: Excellent permeabilityFor chains, it is easier to lubricate the rollers and sprockets, but it is more difficult to lubricate the chain shafts and bushings. Because the gap between the shaft and the sleeve is very small, and it is completely open environmental conditions. If the lubricating oil does not have good permeability, it cannot penetrate into the shaft and sleeve, and cannot lubricate the shaft and sleeve.

B: Good adhesionWhen the chain is running, the lubricating oil will be thrown off due to the effect of high speed. At low speeds, the lubricating oil will drip due to gravity. All these will not only pollute the environment and products, but also cause a lot of waste. Therefore, the lubricating oil is required to have good adhesion and be able to adhere firmly to the friction surface without falling off due to various effects.

C: Has excellent lubricating propertiesOne of the functions of lubricating oil is lubrication, but when the chain is subjected to different effects during operation, the lubricating performance of the lubricating oil is required to be higher, especially those chains under heavy load and impact conditions, which are resistant to extreme pressure wear. The requirements are even higher, so the general chain lubricants are very aware of this requirement.

D: Excellent oxidation stability.Usually chain drives work in an exposed environment, so chain lubricants.E: Very small evaporation loss rate.F: Has a good ability to resist external effects.G: It has the characteristic of being contaminated.H: There is a small tendency to deposit carbon.

Through the above introduction,China Conveyor Chains Company hopes that you can simply refer to the content of this article in future use.