China Plastic Balls Manufacturer Introduces The Requirements For The Use Of Window Rubber Strips

Window rubber strips are used a lot, but many people will be annoyed by not knowing how to use it after holding it in their hands. Because of this, many users will try to understand its usage. Then, China Plastic Balls Manufacturer  Introduce the precautions for the use of window rubber strips:

1. After the window frame and window sash are welded and cleared, the rubber strip must be pushed in the correct surface order with the relevant equipment, and at the same time, its head must be pressed down. It can be fully embedded in the notch, because it has a certain degree of elasticity, so after it is pressed in, it may retract. Therefore, you must master the correct method when operating, and interface on both sides Wherever, the two ends of the rubber strip should be slightly retracted to the middle, leaving a margin of shrinkage in two or three, and then cut short and insert it into the relevant window slot.

2. If the glass bead is processed, then the rubber strip should be processed manually in the correct way, using its sharp [end] position to penetrate into the groove of the profile, and then forcefully expose the outside Press down the adhesive strip and press it into the gap between the glass and the profile, leaving a centimeter or two to cut it short and then press it into the notch.

Through the above introduction,China Steel Balls Wholesaler  hopes that you can simply refer to the content of this article in future use.