Composition and Operation Requirements of C-shaped Steel Punching Roll Forming Equipment

C-shaped steel punching and roll forming equipment is mainly used for coil uncoiling, leveling, CNC punching, roll forming, scale cutting, etc.. The finished workpiece of C-shaped steel is processed and produced multiple single steps are integrated into a whole pipeline. Under the premise of ensuring the quality and accuracy of production, the production efficiency of C-shaped steel is greatly improved and the production cost is reduced.

 

And Jinggong has quality roll forming equipment for sale, you can contact us if interested.

 

1. Composition of roll forming equipment

 

The roll forming equipment is mainly composed of uncoiler, leveling and feeding unit, servo feeding unit, CNC punching unit, roll forming unit and shear unit.  The whole set of structural design is scientific and reasonable. All kinds of electrical, liquid, gas and other components used in the production line use excellent products to ensure the stable state of long-term operation of the unit and reduce the failure rate of the production line.

 

2. Operation requirements of roll forming equipment

 

Before operating the roll forming equipment, first adjust the horizontal and vertical levels, and fix the equipment with foot screws to ensure the smooth operation of the equipment and the accuracy of the workpiece processing. Install the mold corresponding to the required processing material and check the electrical circuit of the equipment and connect it to the power supply. Test whether the equipment is running well with an empty vehicle. If there is any abnormal sound, stop immediately and ask the professional staff to troubleshoot before using it.

 

In order to ensure safety, the connection of the roll forming equipment to the external power supply and the connection of the control cabinet must be completed by a professional electrician. Put the processed workpiece into the mold and adjust the guiding mechanism and material delivering mechanism. Then open the forming mechanism and adjust the position of the workpiece to meet the processing requirements.

 

Roll forming equipment is composed of running mechanism, material delivering mechanism, guiding mechanism and forming mechanism. The material delivering and guiding mechanism is manually controlled by the hand wheel, and the running and forming mechanism is electronically controlled by buttons. There are 4 general-purpose electric control cabinets, and the contactors respectively control the forward, backward and the displacement of the forming wheel.