Corrugated Plastic Box Supplier Introduces The Tips For Handling Hollow Board Failure

Corrugated Plastic Box Supplier introduces what to do if there is a failure in the production of plastic hollow boards:

1. When there are unevenness, bumps, and pores in the production of hollow boards, we need to perform a list analysis, through induction, refinement, and summary, and then analyze and explain some causes and elimination steps and methods, and then summarize some solutions And measures.

2. During the production of the plastic hollow board, how to adjust the process parameters and set the molding conditions, how to debug the mold correctly and quickly eliminate various molding faults, these are some very important technologies, so our hollow board manufacturers must master these technologies.

3. When troubleshooting, the process parameters must be adjusted one by one, and several production conditions cannot be changed at the same time. For example, do not change multiple process parameters such as molding temperature, molding pressure, or cavity structure at the same time.

4. Generally speaking, the failures encountered in the production of hollow boards must be carefully detected and investigated. In order to effectively reduce these failures and increase the utilization rate of the machine.

Through the above introduction, Corrugated Plastic Partitions Manufacturers hopes that you can simply refer to the content of this article in future use.