Corrugated Plastic Box Wholesaler Introduces The Maintenance Process Of Hollow Board Turnover Box

In daily use, the hollow board turnover box will definitely encounter the problem of not being clean, but if the correct use and operation methods are followed, not only can the service life be extended, but also the company’s procurement cost can be reduced. So, Corrugated Plastic Box Wholesaler will teach you how to clean and maintain the hollow board turnover box?

The hollow board turnover box is very simple to clean. As long as you use the container for cleaning agent, latex gloves, rags and brushes, it is cleaned in the general production area. The order of cleaning is first corners and then flat surfaces. From the inside to the outside, from the top to the bottom, so the clean hollow board turnover box is very clean. Put the clean and clean hollow board turnover box outdoors to dry naturally, and then the product can be packaged and shipped with the car, and its performance will not be affected.

Since the hollow board turnover box is made of hollow sheets, and can be customized according to the size, drawings, and characteristics provided by the customer, it has high bending resistance, high load-bearing strength, shock absorption, pushability, light weight, and durability. , Used for the packaging of finished products, during the transportation of the product. It can effectively protect the quality of products, increase the qualified rate of products, reduce costs for customers, and let customers rest assured to use hollow board boxes. Regarding the daily maintenance of the hollow board turnover box, the main points are as follows:

1. When not in use, the hollow board turnover box should be neatly stacked on the flat ground.

2. When stacking and storing, the four corners of the upper turnover box should be stacked in parallel with the four corners of the lower turnover box, and the bottom of the lower turnover box should be flat and in contact with the ground. If it is not stacked in parallel, it will take one time. The long is likely to cause deformation or bending of the turnover box.

Through the above introduction, China Corrugated Plastic Partitions Manufacturers hopes that you can simply refer to the content of this article in future use.