Handmade Sink Manufacturers Share What Is Taichung Basin

After selecting the sink, you need to install the sink. The manufacturer of Handmade Sink will share three methods: above counter basin, Taichung basin, and under counter basin.

1. Above counter basin: This is the simplest and most convenient installation method. The table top has holes, the holes are slightly smaller than the size of the sink, and then the sink is placed on the table, and a round of glass glue is applied around it. This method has good bearing capacity, but it is troublesome to clean up, and the glass glue will become moldy and black later.

2. Taichung Basin: This installation method is to grind off the perimeter after opening the basin on the countertop, so that the back edge of the sink is just inserted into the countertop and flush with the countertop. This method is very beautiful overall, but the installation cost is high, because polishing is time-consuming, the master can not be flush without the worktop, and the gap between the sink and the countertop is difficult to clean.

3. Under counter basin: Different from above counter basin, this installation method needs to open a hole wider than the inner edge of the sink. The sink is glued from below the counter surface, and then fixed with a buckle or stone adhesive, or embedded. The whole is very beautiful and easy to clean up, but the installation is complicated and there is an additional cost. The storage space under the sink will also be less, and the bearing capacity is not as good as the countertop basin.

information about Handmade Sink : https://www.afastainlesskb.com/product/sink/handmade-sink/