High Quality Street Light Housing Factory Introduces The Selection Process Of Lamp Housing
The shell of high-power floodlight is widely used, especially in outdoor lighting work. In fact, when choosing this type of lighting tool, many factors need to be considered in the selection. Then when choosing a high-power floodlight housing, High Quality Street Light Housing Factory reminds you to choose based on what characteristics or factors?
1. Radiator: the important thing is the radiator of the high-power floodlight housing. If the radiator is not done well, the heat dissipation effect will be poor, which will reduce the service life of the high-power projection lamp housing, and the components will be affected by their functions in any high-temperature environment. Such long-term accumulation will surely make product quality more unreliable. Therefore, in the process of product selection, more attention must be paid to the heat dissipation of the product. Once the heat dissipation is not good, the product will work in a particularly harsh environment, which usually adversely affects the product and actual working conditions. Therefore, we must make choices on factors such as radiators. When the product is working, heat dissipation will affect the lighting effect and service life.
2. Power supply: The power supply module is an important part of the projector shell, and the power supply module mainly adopts switching power supply technology. According to different power module types, different standards can be considered for testing and certification. If the power module is a power source, it can be used for testing and certification. A power supply refers to a power supply using an isolation transformer, whose output voltage is less than 60 volts DC, and the current is less than 150 / Vmax amperes. For non-I power supplies, use test certification. The technical requirements of these two standards are very similar and can be referred to each other. The internal power module of most floodlight housings is a non-isolated connection power supply, and the output DC voltage of the power supply is also greater than 60 volts, so it is not applicable to the UL1310 standard, but applicable. In the selection process, the power supply of the product must be selected correctly. These factors will affect the quality of the product to a certain extent, so you must be careful when choosing.
Through the above introduction, Led Street Light Housing Manufacturers hopes that you can simply refer to the content of this article in future use.
