Industrial Chain Design Philosophy

Industrial Chain is specially designed for industrial transportation. It is mainly installed in various types of industrial transportation equipment. When we buy such products, how do we judge the quality? Many friends do not know how to judge when they buy. In fact, we You can start from three aspects. What are the three specific aspects? Let’s look at it together:

1. Observe the appearance of the product: carefully observe whether each chain of the industrial conveyor chain is deformed, and at the same time check whether there are cracks, rust and other problems on the surface, and whether the surface is smooth and delicate. Check whether the roller part, pin part and joint number parts of the chain can be used normally, whether the chain makes abnormal noise when in use, and whether there is abnormal vibration.

2. Is the length of the product accurate: We know that the distance between the two sprockets is the center of the industrial conveyor chain. The center distance of the two sprockets is measured to judge the quality of the product. Generally, the center distance of a good quality chain should be wrong It cannot be too large, and the degree of accuracy between the two is high.

3. Measuring the elongation of the chain: the industrial conveyor chain has a clearance problem during use, so we can measure its elongation by applying a certain pulling tension to it. When measuring, in order to reduce the error, it needs to be in a suitable The position needs to stop measuring, and then stretch it to an extreme state.

Through the above introduction, Leaf Chain Manufacturers hopes that you can simply refer to the content of this article in future use.