Introduction of Utp Cat6 Cables Suppliers
UTP CAT6 Cables Suppliers’ Cat6a or enhanced cables are made of copper cable pairs that are thicker than Cat6 cables, more twisted pairs, and thicker outer sheaths. Again, this helps protect the cable from crosstalk, especially alien crosstalk, which is interference from separate cables. Unlike Cat6, Cat6a cable can transmit 10 Gbps data speed within a distance of 100 meters. Compared to Cat5e and Cat6, thicker Cat6a cables are more expensive and more difficult to install than Cat6 or Cat5e. Due to its improved shielding and thickness, Cat6a cables are more suitable for industrial deployment than residential.
Another important consideration is that these cables can be constructed as shielded twisted pair stp-shielded twisted pair network cable (STP) or unshielded twisted pair (UTP). Shielded twisted-pair cables have a shield around the individual copper pairs, separated from the outer sheath of the cable. This additional shielding works with the shielding built into the outer sheath to further protect the cable from interference, and is most suitable for use in a motor, generator, or mechanical environment that may cause interference.
Cat7 cables from FFTP CAT7 Cables Manufacturers are also available, but they are not often used in typical network deployments. Although these cables can reach speeds of up to 100 Gbps for short distances and 10 Gbps for long distances, they require a different connection type than Cat5 or Cat6 cables. Cat7 wiring consists of a twisted pair shield and a layer of the shield surrounding the entire cable, which must be grounded. Therefore, Cat7 cables are usually reserved for data centers or very large enterprise networks.
