MAGNESIUM WASTE & SCRAP

Long-term supply of pure quality AZ91D, AM60B, and AM50A magnesium waste.

Recycling magnesium alloy waste is of great significance: it can greatly improve the benefit of enterprises, make full use of magnesium alloy raw materials to reduce raw material investment, improve the factory environment, realize the sustainable development of resources and environment, save resources, reduce environmental pollution and prolong the life cycle of magnesium alloy.

Magnesium And Magnesium Alloy Waste Pretreatment

Before smelting magnesium and magnesium waste, magnesium alloy waste must be classified and treated. The treatment methods are as follows:

Clean and classified magnesium wastes can be directly smelted.

Clean and classified magnesium waste materials, but the waste materials mixed with wooden inclusions must be removed before melting in the furnace.

Grade 1 and Grade 2 wastes stained with paint and oil stain shall be melted after the paint and oil stain are removed.

After the dry and clean machining chips and chips are pressed into blocks by a press, they can be melted in a furnace.

Machining debris, chips, and slag stained with oil and water are difficult to deal with. The best way is to recover and utilize them after gasification in a special furnace at high temperatures and vacuum.

After the slag is dried, it can be put into a smelting furnace for smelting.

In addition to the above-mentioned magnesium waste materials and the waste materials which are randomly mixed with various grades of alloys and have been left for a long time, sundries should be selected, dried, and then put into the smelting furnace for melting. After sampling, according to the composition, decide which brand of magnesium alloy to smelt.

 https://www.yiruimetalmg.com/products/magnesium-waste-scarp/