Methods for Prolonging the Service Life of Color Steel Tile Forming Equipment
In winter, the maintenance of color steel tile forming machine is relatively concerned by the majority of color steel tile forming machine equipment users, because the service life of the machine depends on the correct use and maintenance. The daily maintenance of the equipment of the color steel tile forming machine plays a decisive role in the service life of the equipment. Therefore, attention should be paid to the maintenance of the equipment in daily use. The equipment maintenance is generally divided into three main parts.
1. Mechanism maintenance of tile forming machine
The mechanism shall be regularly maintained and lubricated to reduce the friction coefficient and wear. The nuts and locking screws on the head plate shall be checked regularly to prevent the column from breaking due to uneven stress. The die thickness adjustment mechanism shall regularly check whether the transmission shaft big gear or chain is offset or loose. Check regularly whether the pressing plate screw on the gear of the tile forming machine is loose and whether the lubricating grease is sufficient.
2. Electric control part maintenance of tile forming machine
Traditional tile forming machines use contact relays to switch various operations. They often fail due to loose contact screws and aging contacts. Usually, they should be replaced after one million times of use to ensure the stability of the electronic control. In particular, environmental factors such as dust adhesion and air humidity will also affect the machine’s operation.
On the contrary, modern tile forming machine adopts contactless integrated circuits, which greatly reduces the connection of wires, significantly reduces the undesirable phenomena caused by the wires, and improves the stability.
3. Hydraulic part maintenance of the tile forming machine
In the hydraulic system, attention should be paid to the cleanliness of the hydraulic oil to maintain the quality of the hydraulic oil, and hydraulic oil with good stability and high quality should be used. In addition to regular replacement, the operating temperature should be properly controlled below 50 degrees Celsius to avoid deterioration of the stability of the hydraulic action.
