Nylon Tube
Nylon tubes provide great stability against wear, stretching and bending, and are easy to install without any special tools. Its good comprehensive performance is the copper pipe, steel pipe, rubber tube incomparable, is the ideal material to replace copper, steel, rubber.
The Technical Indexes of Nylon Tube
Name
Company
MC nylon
PA1010
Density
G/cm³
1.12-1.14
1.05
Tensile strength
Mpa
≥80
50
Elongation
%
100-300
100-250
Brinell hardness
Kg/mm²
21
17.2
The rate of water absorption
%
0.9
The coefficient of friction
0.23
The dielectric constant
3.3
3.6
Specification of The Nylon Tube
Species
Rod(mm)
Tube(mm)
Plate (mm)
Diameter
Length
Outer diameter
Wall thickness
Length
Wide
Thick
Mc nylon
30-500
300-500
40-500
≥10
≦4000
1000
≥ 5
Extruded nylon
6-250
1000
Nylon hose
6-14
Usage of Nylon Tube
Nylon can be used for large gera, worm gera, shaft sleeve, a large sealing surface, a guide ring, a guide rail, a slider of hydraulic gate, rolling bearing retainer, etc.
Nylon tubes are most suitable for: Compressed air system, lubrication system, flammable oil fluid pipeline, hydraulic pipeline, some chemical fluids, food fluids the product light quality, moisture resistance, salt water resistance, good aging resistance, sun exposure resistance, ten nylon tube is generally used for hydrocarbons, aromatic, aliphatic solvents, oil, fuel and refrigerant, not strong acid, strong base, phenols and so on; Commonly used transport fluid: 40 degrees carbonated soda, 40 degrees carbonated water, -20~40 degrees alcohol, distilled water, sea water, oil, etc.
Features of Nylon Tube
Nylon tube (polyamide), PA tube for short, another name nylon tube. Is a synthetic fiber, has good physical, chemical and mechanical properties: wear resistance, can be used in the condition of sand, iron filings; Smooth surface, reduce resistance, can prevent rust and scaling deposition; Soft, easy to bend, easy to install, simple processing. At the same time with steel, when you need a certain shape, you can be made into a variety of shapes like metal tubes, and do not need complex equipment and tooling; Resistant to corrosion by many chemicals; Stable size and small permeability; Great resistance, can be used as an insulator; The service life is very long, even decades; Good temperature resistance can work in -40-100°C environment.
https://www.xinrui-plastic.com/products/nylon-tube.html
