Pool Table Moving Made Easy: Expert Tips for Perth Locals

Moving a pool table is no small undertaking; it is heavy, fragile, and takes a lot of preparation. Whether you are relocating or simply reorganizing your space in Perth, precision is called for in how you treat your pool table to avoid damage. In this article, we will take you through some expert tips to make your moving of the pool tables Perth smooth and stress-free. 

Why Moving a Pool Table is Tricky

The pool table is an inherently peculiar piece of furniture; from the combination of various materials, wood and felt, to the heavy and fragile nature of the equipment, it only takes slight mishandling to cause anything from slate cracks to warped wood or torn felt, all of which affect the play of the table.

Most pool tables range from 500 to 1,000 kg. Although all Pool Table Movers Perth are heavy, slate pool tables are a heavier lot. Besides, their design is such that not only are they an agony to move around, but it is also very critical to dismantle them well and assemble them at the destination so that they remain level and balanced.

Tool Up and Supply

To move a pool table without injury or damage, you would need the following tools and supplies:

Socket Wrenches: To dismantle the legs and frame.

Screwdrivers: These will be used for removing the side rails and pockets.

Furniture Dollies: You’ll want to use furniture dollies for moving heavy parts to save yourself from straining your back.

Thick Blankets: To wrap up the slate, rails, and other pieces to protect them from scratches and damage when moving.

Measuring Tape: To double-check that measurements are accurately made while reassembling the table.

If you’re hiring professionals, they will bring special equipment meant for moving pool tables in safety. For the self-move, ensure you have everything you need to get started.

Disassemble the Table Properly

You can’t just lift a pool table and move it across the room. Disassembling is an important step to take in ensuring nothing gets broken. Here’s how to do it, step-by-step:

Step 1: Take out the Pockets

Use a screwdriver and take off the pockets from the rails for which most of the pockets are stapled or screwed; both have to be cautiously removed.

Step 2: Removing the Rails

Now that the pockets have been taken out, use a socket wrench to remove the bolts holding the rails. Remember to save all the bolts and screws in labeled containers for reassembly later.

Step 3: Removing Felt

Gently pull the felt off of the slate. Some felts are stapled on, others are glued down. If it’s stapled, set it with a staple puller or flathead screwdriver. If it’s glued, you’ll need to very carefully peel it off without stretching or tearing it.

Step 4: Disassemble the Slate

Most pool tables come with 3 pieces of slate, each over 150 kg. Use a socket wrench and remove the screws holding the slates to the frame. Lift pieces of slate with at least two people, or else they will break and cause injury.

Step 5: Take Apart the Frame and Legs

Last but not least, unscrew the legs and take the wood frame apart. Make sure you label everything so it is easy to put back together.

Safely Transport the Pool Table

Now that it is disassembled, it is time to Pool Table Removalist the pieces. Utilize dollies or furniture sliders to transport the slate, legs, and frame portions. Wrap the slate in thick blankets or bubble wrap; even minor chips can greatly affect a table’s performance.

When loading the pieces into a vehicle, make sure that the slate is lying flat and well-fixed as it moves; this could cause shifting that might damage parts of the table. Besides that, putting heavier stuff on top of it may develop cracks.

Moving your pool table across Perth, which may be possible, requires either a truck or a large van. Also, keep an eye out for Perth’s traffic and road conditions since there can be unnecessary bumps to damage your table.

Rebuilding the Pool Table

The challenge now comes when, at your new place, you have to rebuild your pool table correctly. The following are the key points to remember:

Level the Slate: The slate, after attaching the legs and frame, is supposed to be perfectly levelled. Improperly leveled slate results in balls rolling out, of course, and gameplay will get ruined. Take a carpenter’s level to check its balance, making adjustments by shimming the legs if need be.

Reattach Felt: Once the slate is in an already level position, now is the time to stretch the felt on it. Make sure the felt is taut, smooth, and securely stapled or glued.

Reattach Rails and Pockets: Now, the finishing touch is performed by re-attaching the rails and pockets tightly. All bolts should be tightened, and the rails should be close enough not to move during games.

Hire Professional Pool Table Moving Experts in Perth

It is not very easy to move a pool table; besides, if not confident, it is advisable to outsource professionals. The pool table movers are specialists in disassembling, transporting, and reassembling the pool table without damage to the slate, felt, or frame. They would bring in all the right tools and expertise and make sure that after relocation, the table is just perfectly level and balanced.

There will also be insurance available for professional movers to take responsibility for any damage that might occur. This will add a personal touch and ensure your comfort throughout the move.

More Tips on Moving Pool Tables

Measure around doorways and hallways: Before the move, measure the size of the doorways, hallways, and staircases through which the pool table should pass. This will help in avoiding tight squeezes or awkward angles.

Store Parts Properly: All small pieces, like screws and bolts, must be separately packed in bags and labeled appropriately. This will help in making the assembling process smooth and time-effective.

Ask for Help: Dismantling and relocating a pool table necessitates at least 3-4 people. It is highly not recommended to try to move heavy pieces yourself because it may cause injury or further damage to the pieces.

For people residing in Perth, Quick Shift can handle your pool table move with utmost ease. At Quick Shift, we are licensed and specialize in large, heavy items, such as pool table moves with precision and care. Our professional movers take every step in the process to ensure that your pool table is taken apart, transported, and put back together with expert attention to detail. From moving down the street to across town, we make it seamless from start to finish. Need to book your move? Visit Quick Shift Removals today!