Push Ball Valve
Because the push to connect flanged bronze ball valve is designed and manufactured with a push rod connection, push ball valve is ideal for service and maintenance work in tight spaces. Install push button ball valve on wet pipelines quickly to stop the flow of water. There are no special tools, crimping, glue, or welding required. Professionals can enter, complete repairs, and move on to the next job because push fit ball valve is compatible with PEX, copper, CPVC, PE-RT, and HDPE pipes. Push to connect ball valve has a wide range of ball valve options, including antifreeze ball valve with drain and spool valves. The spool valve allows for removing two inches of copper or CPVC pipe from an existing pipe.
Push Ball Valve Details:
Ball valve rating: 200PSI
Pushfit connection rating: maximum working pressure 232PSI
Max temperature 203oF (95oC)
Designed specifically for use in COPPER (PEX/CPVC) piping system
Pushfit ends comply with ASSE1061
Applied only for water
Push Ball Valve Specifications
Push Ball Valve
Product Code
Size
C
L
H
1BPA004
1/2″ Pushfit
92.5
75
43
1BPA006
3/4″ Pushfit
92.5
91
46.5
1BPA008
1″ Pushfit
106
110.5
61.5
Push Ball Valve
Category 1 Code
Category 2 Code
Size
C
L
H
1BPAa04
1BPAb04
1/2″ Pushfit
3.64″
2.95″
1.69″
1BPAa06
1BPAb06
3/4″ Pushfit
3.64″
3.58″
1.83″
1BPAa08
1BPAb08
1″ Pushfit
4.17″
4.35″
2.42″
How To Make Push Ball Valve
A new electric mechanical ball valve is often used as a liquid breaking device. It can be operated quickly and easily, and has only a small liquid resistance when it is opened. This motorized ball valve is designed to apply torque to the shaft head when the ball valve is operated. A flat square head is inserted into the long groove on the ball and turned. The gap between the flat square head and the groove is small, and the gap in the length direction is large. In this way, the industrial ball brass valve can be prevented from sliding down when it is closed, and the fluid pressure will evenly form a seal; the positioning pin and the limit plate form an operating position in the open and close positions; adopt a flat-head valve stem and handle. The connection will not be misaligned. So as to ensure that the handle indicates the switch shape.
