Rubber Rings Factory Introduces How To Deal With Burrs

Rubber seals will inevitably have burrs during production. Therefore, it is important to treat burrs in time when they encounter burrs. However, many people do not know how to treat burrs to achieve a non-destructive effect. So, let Rubber Rings Factory teach you how to deal with such burrs.

1. Manual processing. When processing the burrs of the rubber seals, you can choose manual trimming treatment. This method is very labor intensive, and the efficiency is relatively low. It is easy to cause damage to the rubber seals when trimming the burrs. It is a method with a relatively low pass rate.

2. Mechanical trimming. Its trimming method is mainly corrected by punching, round knife trimming and grinding wheel edging, etc. It is more suitable for rubber seals that do not require high precision. However, if the precision is relatively high, then use Mechanical trimming may induce abnormalities.

3. Frozen trimming. This is a method of trimming with a special refrigeration equipment machine. It uses liquid nitrogen to process the burrs of the finished product. These burrs will become brittle under low temperature conditions, and then use the relevant The frozen ions are used to strike the burrs, so that the burrs can be quickly processed. This trimming method is more efficient and low in cost. It is currently the mainstream method of repairing the burrs of rubber seals.

Through the above introduction, Mist Pump Box Manufacturers hopes that you can simply refer to the content of this article in future use.