Rubber Rings Factory Introduces The Design Details Of Rubber Seals

Rubber Rings Factory introduced that seals made of rubber must be designed in accordance with the requirements, because only by designing in accordance with the requirements can the effect of use be ensured. However, many people do not know what the design requirements of rubber seals are. So, look at the specific requirements.

1. Allowable amount of leakage. Among the relevant design schemes, it is very important to allow the amount of leakage required, which is mainly determined according to the use of rubber seals. It refers to the leakage that occurs when the machine is in normal operation and normal operation. The situation is allowed to exist, so please understand clearly when purchasing.

2. Friction. When rubbing, it will cause damage to the rubber seal, and even damage the convex surface of the parts. Therefore, the friction resistance of the selected material and the standard requirements for lubrication are also very important when using it.

3. Damaged. After friction, it will inevitably cause damage. Therefore, when designing rubber seals, it is necessary to reduce its service life and wear as much as possible. However, its wear is generally related to the selection of raw materials and hydrodynamic wettability. Of course, rubber seals may also cause damage to the shaft, especially when some wear-resistant materials are used, which may cause the rubber seals to wear quickly.

4. Specifications. The equipment of the rubber seal should be as compact as possible, and the selected size should also be determined according to the overall situation of the equipment.

The above content is organized and shared by Mist Pump Box Wholesaler, hoping to help those in need.