SDS-07560 0.75mm Diameter 60mm Length Hooked End Steel Fiber
This fiber is made of cold-drawn wire. Because of its high tensile strength, good toughness, and low price, it is often used as a substitute for glued steel fibers. Compared with traditional concrete, this kind of steel fiber has a great improvement in crack resistance and antiknock performance.
The Specification of SDS-07560 0.75mm Diameter 60mm Length Hooked End Steel Fiber
Name SD-07560
Type Loose
Diameter 0.75mm
Length 60mm
L/D(length/diameter) 80
Tensile strength >1150Mpa
Application shotcrete
The Advantages of SDS-07560 0.75mm Diameter 60mm Length Hooked End Steel Fiber
High crack resistance to retard crack development;
Good anti-seepage and moisture-proof performance;
High tensile strength, flexural strength and good impact resistance;
Wear resistance, fatigue resistance, durability and corrosion resistance;
Hooked end steel fiber provides high bending resistance and toughness;
High strength, high rigidity and strong shear resistance
USER’S GUIDANCE
Dosage: depend on the application and minimum dosage is 20kg/㎥-70kg/㎥
Mixing: When pouring sand and aggregates into the hopper, mix an appropriate amount of loose steel fibers evenly, and then add cement. Put it in a mixing table, dry and mix for 2 minutes. If it is glued in rows of steel fibers, you need to add steel fibers after adding water so that the water can dissolve the bonding glue.
Put the uniformly mixed fiber concrete into the conveyor and transport.
Concrete pouring and laying should be compacted.
The Safety & Packaging of SDS-07560 0.75mm Diameter 60mm Length Hooked End Steel Fiber
Star Smith is a professional steel fiber manufacturer that can offer a wide range of steel fibre types that meets different needs.
Packaging:20kg or 25kg per bag/carton or as your requirements, there are 50 bags or 1000kg in a pallet, 24tons per 20’container.
And the pallets should be waterproof, don’t stack pallets on top of each other.
Gloves and eye protection should be used when adding the steel fibers.
