Stainless Steel Faucets Manufacturers Introduces The Installation Process Of Shower Head
Stainless Steel Faucets Manufacturers introduces the installation height of the shower head
①The height of the shower mixing valve from the ground: The distance between the shower mixing valve and the ground is generally within a height range of about 90~100cm. In this interval, we can also fine-tune according to our height. But generally do not exceed 110cm, if it is too high, it may cause the shower riser to be unable to install.
②Reserved height of shower faucet: first consider the reserved position when laying pipes, generally 15mm higher than the rough wall, so that the silk head can be buried when the tiles are finished to ensure that the wall is beautiful.
③The reserved spacing of the inner wire elbow of the shower head: The general standard for the reserved spacing of the inner wire elbow of the shower head is about 10~15cm.
Through the above introduction, Stainless Steel Faucet Wholesaler hopes that you can simply refer to the content of this article in future use.
