Stainless Steel Sink Manufacturers Tell You How To Use The Space Below The Sink

Important reference indicators for selecting stainless steel sinks are stainless steel finish, brightness, and stainless steel water storage. Products with high finish, pure color, not easy to hang dirty dirt, easy to clean, good self-cleaning. The lower the water absorption rate, the better the product. Below Afa Stainless Steel Sink Manufacturers tells you the size standards for the sink.

The depth of the stainless steel sink is 200mm. It is very important to design the details of the stainless steel sink. The vertical angle of the basin wall of 90 degrees can increase the use area of the sink. The depth of the sink should be about 200mm so that the tableware can be washed more conveniently and can prevent splashing. If the water hole is in the center of the sink, the cabinet can’t put anything. The water hole below is behind, and the water pipe is installed on the wall. Not only does it get off the water, but it also makes effective use of space.

A protective coating is added to the bottom of the stainless steel sink for quiet and anti-condensation. Although the stainless steel sink does not seep water, the outer wall of the stainless steel sink is prone to moisture condensation, which is not good for the cabinet. Applying a special coating on the outside of the sink not only absorbs water vapor but also reduces the noise generated by the collision of water and sink during washing. A better coating is to use a mortar to spray the entire surface of the sink. Ordinary one is attached to the bottom with a rubber gasket, which can also provide a quiet sound effect.

When the stainless steel sink is installed, the position of the countertop should be consistent with the volume of the sink. When ordering the countertop, the approximate size of the sink of the countertop supplier should be informed to avoid rework. At present, most branded sinks provide on-site installation services, but reservations need to be made two or three days in advance. Many owners buy the sink and use it directly for the decoration workers to install, but many brands of sinks stipulate that if you do not specify the installation personnel to install, the sink will be responsible for water leakage and other issues. One end of the inlet pipe on the faucet is connected to the water inlet switch. When installing, pay attention to the firmness of the joint, and pay attention to the position of the hot and cold water pipes.

After the general sink is bought, the worker will cut the countertop of the cabinet according to the size of the sink. After placing the countertop, it is necessary to install a matching hanging piece between the trough and the countertop. The sink should be installed firmly and the tank should not be shaken from side to side. The installation of the sink is not a big project in the whole decoration, but pay attention to the sealing of the joints during the installation process.

The installation of the stainless steel sink is also very important. When installing the stainless steel sink, it is necessary to do all the drainage tests. After the installation is completed, a drainage test is carried out, the water tank is filled with water, and the drainage of the sewage water and the overflow hole is tested. If there is any water seepage when draining, rework immediately. After the drainage test, if there is no problem, the stainless steel sink can be sealed. When sealing with silicone, it is necessary to ensure that the gap between the stainless steel sink and the countertop is even and there is no water seepage.

information about Stainless Steel Sink Manufacturers : https://www.afastainlesskb.com/product/stainless-steel-sink/