The Function of Color Plate Cold Roll Forming Machine
Ⅰ. Introduction of color plate cold roll forming machine
The color plate cold roll forming machine refers to a plastic processing method in which a metal plate and a metal strip are sequentially bent to process the plate into the required cross-sectional shape on a row of forming rolling mills. Roll-type cold roll forming (color steel tile equipment) has been used in the manufacturing of bicycle rim and umbrella frame, etc.
Ⅱ. What are the functions of the color plate cold roll forming machine?
1. First, make the four corners of the front and back lines of the color plate cold roll forming machine equal in height from the upper end of the large frame to the bottom shaft. Then find a line to straighten from the first row to the last row, and check whether the upper shaft and lower shaft is in a straight line, adjust the left and right sides of the lower shaft to be horizontal
2. Find the center between the first row and the last row of the color plate cold roll forming machine. Then tighten the lock nuts on both sides, pull a straight line back and forth in the center of the middle wheel. After adjusting the gap between the upper and lower shafts, the machine can be adjusted along the straight line.
3. The debugging methods for the deviation of the pressure plate of the color plate cold roll forming machine are as follows. If the plate runs to the right, pad the left corner (feeding rack), or drop the right side of the bottom (which shaft deviates, the bottom of the corresponding shaft falls, and the upper shaft also falls with the lower shaft).
Zhejiang Jinggong Science & Technology Co., Ltd. has international advanced core technology and more than 50 years of experience in manufacturing special equipment. With the entrepreneurial spirit of “being brave to innovate and striving for perfection” and the business philosophy of “profession, dedication, technology and leading”, we cooperate with well-known institutions and universities of higher learning in China. If needed, please send your consultation.
