The Use Process Of Fine Mist Sprayer

Fine Mist Sprayer is mainly composed of a diffuser cover, suction pump, one-way valve, suction tube, and outer tube, etc. The outer jacket is a component with a right-angle channel inside. The lateral opening of the outer jacket is equipped with a diffuser cover, and the downward opening of the outer jacket is fixed. There is a locking cover. The lock cover has a through-hole at the opening corresponding to the outer cover. The inner diameter of the through-hole is smaller than the inner diameter of the outer cover. The through-hole of the cover constitutes a one-way valve

a hole is opened on the right-angle channel of the outer casing between the diffusion cover and the one-way valve to communicate with the suction pump; the piston in the suction pump is connected with a wrench, and one end of the wrench is provided on the outer casing The liquid inlet under the lock cover is connected with a straw, and the other end of the straw extends into the bottom of the bottle containing the sprayed liquid to ensure that the sprayer can spray all the liquid in the bottle as much as possible. When in use, press the wrench to make the piston in the suction pump reciprocate, suck the liquid from the bottle and spray it out of the diffusion cap.

The application range of Mini Trigger Sprayer is medical, cosmetics, agricultural or perfume bottles, and other places where the spray is needed. It is characterized by small size, large capacity, healthy and environmentally friendly materials.