Thickness Knowledge Of Handmade Sink

The thickness of Handmade Sink : Good stainless steel sinks use thicker plates, preferably between 0.8-1.0mm, and the bottom thickness of the basin should reach 1mm. In this thickness, choose 304# stainless steel to make the sink tough. Too thin will affect the service life and strength of the sink. Too thick will easily damage the tableware. This thickness can avoid damage to all kinds of porcelain utensils due to impacts. . The ordinary low-grade water tank adopts 0.5mm-0.7mm, and the method of identification can be distinguished from the weight and whether the surface is flat. Because of the edge treatment of the sink, it is difficult to see the thickness at once. The easiest way is to press the surface of the sink with a little force. So troublesome. The domestic manufacturers selling sinks with SUS304 mainly include Afa sinks, Franke, and Bolanggao. Most of them on the market say they are SUS304, but they are actually 201 or 202.

Sink edge thinness (thickness): The light and thin edge not only unifies the maximum washing space and the minimum appearance size of the sink. For a long time, people believed that the thicker the edge of the sink, the better, so that the water would not splash out. This is actually a misunderstanding between imagination and reality. In fact, whether water will splash out depends only on the depth of the sink. If the thin edge of the sink is exquisite in workmanship, it can fit well with the countertop to prevent water seepage at the joint. Even if water droplets and debris fall on the countertop, it can be easily wiped into the sink with a rag. Therefore, choose Pay attention to the flatness of thin edges, because thin edges require relatively high processing technology, and the thinner the edges, the more difficult it is to smooth them.

 

The above content is compiled and shared by the Stainless Steel Kitchen Cabinets manufacturer, hoping to help those in need.