UTP Cat6 Patch Cord Cables Suppliers Technical Comparison

First of all, here is a technical comparison between UTP Cat6 Patch Cord Cables Suppliers’ Cat 6 and Cat 6A cables:Similarities:1. Support 10/100/1000 Mbps (megabits per second) speed to 328 feet (100 meters)2. Made of eight copper conductors twisted into four pairs3. Ended with TIA 568A or B color code specification4. Make sheaths for different installation requirements (such as standpipe ratings)5. There is an internal cross skeleton called a spline, which is made of plastic to keep the pairs apart6. Can be unshielded or shielded

the difference:

1. The manufacturing and termination tolerances of Cat6A cables are stricter than those of Cat6. This means that the copper conductors are twisted tighter. This requires higher specification patch panels, wall jacks and RJ45 connectors.2. Cat6A speed is at least 500 MHz. This allows 10 Gbp/s (Gigabits per second) up to 328 feet (100 meters). The maximum speed of Cat6 is 250 MHz. Therefore, it only supports 10 Gbp/s to 165 feet (55 meters) under ideal conditions-less in severe crosstalk environments.3. Cat6A cables from FFTP CAT6A Cables Manufacturers usually use thicker copper conductors and sheaths. This makes installation more difficult and drives up prices.