China Stainless Steel Sink Company Introduces The Method Of Measuring The Size Of The Sink

China Stainless Steel Sink Company introduces the size specification of kitchen stainless steel sink:

1. Distance between holes: rear position, middle position and lateral rear position, so that there is plenty of indoor space under kitchen cabinets. Next to the side.

2. Material: stainless steel plate with strength and smoothness of 301,304,430. 305DDQ stainless steel plate is good. Lightweight, wear-resistant, heat-resistant, anti-aging and non-rusting.

3. Thickness: the overall bending stiffness is generally 0.7 ~ mm.

4. Edge: thin edge, ultra-narrow edge and straight edge. Generally, the side height is < ＜4mm, and the side width is < 20mm, which can make the table top of the cabinet level, prevent side leakage, and make the basin reasonable in volume.

5. Flatness of basin wall: vertical basin bottom with arc angle. The vertical angle is good, which makes the reasonable total area of the pelvic floor large and convenient for practical operation

6. Deep layer: shallow and deep are generally better than ＞180mm, with deep basin, large cleaning capacity and water splash resistance.

7. Flatness: the most visualized standard of quality and level. Generally, it should be in the middle of+0. mm, which reflects good machining accuracy and elegant appearance.

8. Sewer pipe parts: PP/PVC materials with good precision and hard parts have the same service life as stainless steel sink, and are anti-blocking and free of leakage.

9. Water trap: precise positioning of steel beads, extrusion molding of vulcanized rubber, and spiral extrusion molding. Precise positioning of steel beads, convenient and rapid storage of water, and automatic filtering when adding water.

Through the above introduction, Stainless Steel Laundry Cabinet Company hopes that you can simply refer to the content of this article in future use.