China Stainless Steel Sink Company Introduces The Selection Characteristics Of Sinks
China Stainless Steel Sink Company introduces how to choose a sink that suits you:
1. Material.
At present, common sink materials in the market include brush-resistant stainless steel sinks, artificial crystal stones with rich colors and acid and alkali resistance, corian and ceramics that can be seamlessly connected to the countertop with fine texture. Each sink material has its own characteristics, you can choose the sink material according to your own habits and preferences. I personally recommend a sink made of 304 steel, which has low carbon content and better flexibility.
2. Process.
There are two main production methods for sinks: one is punched with water flow at one time, and the other is welded. Welding is divided into bottom welding, middle butt welding, wheel welding and other methods. One-time stamping sink should be our first choice. It has good sealing performance, but the depth of this sink is not as deep as welded. Usually its depth does not exceed 18cm, and the depth of welded sink can reach up to 21cm. If you want to choose a deeper sink, you must pay attention to the degree of sealing of the welding. The welding must be tight, and there should be no false welding. Welding quality is the most critical factor affecting the life of the sink. Good welding can prevent rust and desoldering. The sink should be dirt-proof, shiny, oil-proof, and stain-free after cleaning, and the bottom of the basin should reach a thickness of 1mm. In addition, if the thin edge of the sink is exquisitely crafted, it will fit well with the countertop to prevent water seepage at the joint. Even if water droplets and debris fall on the countertop, they can be easily wiped with a rag. Into the slot. Therefore, pay attention to the flatness of the thin edge when purchasing, because the thin edge has relatively high requirements on the processing technology, and the thinner the edge, the more difficult it is to smooth it.
3. Choose according to the space of the kitchen.
Single-tank and double-tank sinks are suitable for small kitchens. Families with too small kitchen space usually choose a single tank, which can only meet the most basic cleaning functions. The double-slot design is widely used in homes. It can meet the needs of cleaning and separate treatment, and it becomes the first choice because of the proper use of space. The three-tank or sub-tank tank is mostly special-shaped design, which is more suitable for large kitchens with individual styles. It has multiple functions such as soaking or washing and storage. It can also separate raw and cooked food, saving time and effort.
4. Choose according to accessories.
General plastic pipe fittings, especially hoses, are not resistant to hot water and are prone to aging, and the joints are easy to fall off and leak water. The PP material of the sewer pipe has a high sealing degree to prevent water leakage. The drain needs to have steel ball positioning and squeeze seals. The positioning of the steel ball is the key to the drainage of the sink. If the quality of the positioning of the steel ball is good, the sewage can be discharged quickly. In addition, the sewer pipe is designed to be S-shaped, which can reduce the back smell of the sewer. A protective coating should be added to the bottom of the sink, which is used for silence and anti-condensation. Although the sink does not seep water, the outer wall of the sink is prone to condensation of water vapor, which is quite detrimental to the cabinet. Applying a protective coating on the outside of the sink can not only absorb water vapor, but also reduce the noise caused by water colliding with the sink during washing. A better coating is to use mortar to spray the entire back of the sink, and usually a rubber gasket is attached to the bottom, which can also play a silent role.
Through the above introduction, Stainless Steel Laundry Cabinet Company hopes that you can simply refer to the content of this article in future use.
