• $10

HAMMER FINISH SPRAY PAINT

7CF® Hammer Finish Spray Paint is a quick-drying alkyd aerosol paint, the paint film has an uneven hammer finish effect, excellent adhesion, flexibility, impact resistance, excellent decoration effect, and good protection function.

 

Hammer Finish-A00 SILVER

Hammer Finish-A00 SILVERHammer Finish-A03 BROWNHammer Finish-A11 GREYHammer Finish-A12 MEDIUM YELLOW GREENHammer Finish-A13 DEEP GREENHammer Finish-A18 BLUEHammer Finish-A19 GOLDHammer Finish-A22 PURPLE

For more colors, please download the 7CF color card, welcome to customize the colors you need.

7cf-color-card

TDS & SDS

HAMMER FINISH SPRAY PAINT FEATURES & BENEFITS

Provide films with hammer finish effect

Excellent durability indoors and outdoors

Fast drying

Superior corrosion resistance

Great for metal, wood, glass, and more

 

HAMMER FINISH SPRAY PAINT FEATURES & BENEFITS

HAMMER FINISH SPRAY PAINT APPLICATIONS

 

It is widely used in the coating of various metals, surface-treated wood, glass, ceramics, and other objects, such as machinery, steel door, theft-proof window and door, electronic tools, medical equipment, handicrafts, etc.

 

DIRECTION

1

Thoroughly remove dirt, grease, oil, and water on the surface to be painted.

2

 Fill the recessed part with Poly-Putty Base and smooth it.

3

Shake can vigorously for two minutes after the mixing ball begins to rattle, until the paint is fully mixed and uniform.

4

Hold can upright 20-30cm from surface and use your index finger to press down the nozzle to spray in a steady back and forth motion.

5

Apply in thin multiple layers, thin layers applied every 2 minutes are always better than one thick layer.

6

If the spray is not finished at one time, turn the bottle upside down and press down the nozzle for 3 seconds to clean out the valve and prevent plugging.

 

PHYSICAL & CHEMICAL PROPERTIES

Item

Standard

Remark

Resin Type

Alkyd Resin

Pigment Type

Varies with color

Appearance

Film flat and smooth, no mechanical impurities, accord with the confirmed sample.

Eye test

Drying condition

Touch dry ≤30minutes,

finger press dry ≤ 2 hours

Under the temperature of 20℃

Recommended Thickness

18-25µ

Volume Solid

15-25%

Specific Gravity

0.90-1.15

Adhesion

≤2

Circle Testing

Hardness

≥HB

Dry after 48 hours

(Room Temperature)

Gloss

Gloss ≥80; Matt accord with the confirmed sample

60℃ gloss level, relative moisture ≤ 75%

Flexibility

≤1mm

Spraying rate

≥98%

Practical Coverage at Recommended DFT

(assumes 15% material loss)

0.8-1.2 m2 /can

Dry Heat Resistance

200°F (93°C)

Flash Point

-156°F (-104°C)

Shelf Life

Three Years

 

PACKAGING SPECIFICATIONS

ITEM NO.

Container size

Optional sizes

A-S-004

10oz(283g)

8oz(226g), 9oz(255g)