How To Install Stainless Steel Faucets

The installation steps of Stainless Steel Faucets are as follows:

1. Find the eccentric joint of the stainless shower faucet, and connect it to the pre-buried outlet joint, pay attention to the distance between the eccentric joint and the wall outlet should be controlled at about 15cm.2. The second step is to assemble the outcrop body and the main body’s outlet pipe. At this time, the thread should be wrapped with raw material tape, and then the main body faucet is placed at the water outlet and screwed and fixed.3. The third step is to install the faucet rod and the faucet together on the eccentric joint, pay attention to seal the nut behind the faucet and the middle of the eccentric joint.4. In the final step, install the top spray of the faucet at the position of the elbow at the top of the faucet rod, and then use a stainless steel hose to connect the faucet body and the hand-held faucet.

 

The above content is organized and shared by Lavatory Cabinet Manufacturers, hoping to help those in need.