• $2000000

Manufacturer Of Vibration Polishing Machine Tells You The Benefits Of Hand Waxing

The automatic polishing machine is relatively simple to operate, just place the workpiece on the corresponding fixture and fix the fixture on the automatic polishing machine. Then start the automatic polisher and set the polishing work time. When the time is up, the polisher will automatically stop and the object can be removed from the workbench. The following Vibratory Polishing Machine manufacturers will share how to throw the best results?Before polishing the automatic polisher, the distance between the polishing head and the work surface needs to be adjusted. In order to achieve the best contact results, the best results are thrown.Manual waxing can be used during the polishing process to reduce machine manufacturing costs. The polishing machine consists of basic components such as a base, a dish, a polishing cloth, a polishing cover and a cover. The motor is fixed to the base, and the tapered sleeve for fixing the polishing disk is connected to the motor shaft by screws. The polishing fabric is attached to the polishing disk by a ferrule. After the motor is turned on through the switch on the base, the sample can be manually pressed to be polished on the rotating polishing disk. The polishing liquid added during the polishing process can be poured into a square plate placed beside the polishing machine through a drain pipe in a plastic tray fixed to the base. When the machine is not in use, the polishing cover and cover prevent dust and other debris from falling on the polishing fabric, which can affect the use.The key to the operation of the polishing machine is to obtain the maximum polishing rate as much as possible in order to remove the damaged layer from the polishing as quickly as possible. At the same time, polishing the damaged layer does not affect the final observed tissue, ie it does not cause false tissue. The former requires a coarser abrasive to ensure a higher polishing rate to remove the polished damage layer, but the polished damage layer is also deeper; the latter requires the use of the best material to make the polished damage layer shallower but with a lower polishing rate . The best way to resolve this contradiction is to divide the polishing into two phases: rough and fine.The purpose of rough polishing is to remove the polished damaged layer. This stage should have a maximum polishing rate. Surface damage caused by rough polishing is a secondary consideration, but should be as small as possible. Second, fine polishing (or final polishing). The goal is to eliminate surface damage caused by rough polishing and to minimize polishing damage.

information about vibratory polishing machine: https://www.zhongyun-machine.com/product/vibratory-polishing-machine/