Operating Instructions For Vibratory Polishing Machine
Many people don’t know much about the use of Vibratory Polishing Machine, so let’s share the process of using Vibratory Polishing Machine : cleaning steel balls – polishing → cleaning → dehydration dryingThe specific operation method is as follows:1. Turn on the vibratory polishing machine, add 400ml of brightener, and add 5000ml of water to clean the steel ball. The cleaning time is 10 minutes. When the steel ball reaches the gloss effect, clean the process with clean water and drain the waste water.2. into the workpiece at a constant speed, the number of workpiece placement depends on the size of the workpiece, put 400ml of polishing agent, add water to foam, polishing, polishing time can be determined according to the material of the workpiece, until the brightness of the workpiece meets the requirements.Note: The higher the temperature of the steel ball, the better the polishing effect and the shorter the time.3. Washing (rinsing residual foam on the surface of the workpiece)4. Dehydration and drying.
information about vibratory polishing machine: https://www.zhongyun-machine.com/product/vibratory-polishing-machine/