• $1

Smart Card Personalization and Issuing Machine

The equipments of this unit can finish data write and other personalized operations for Telecom card, Social Security Card, bank card. can finish Smart Card Sorting and Ranking, can finish chip module encapsulation and Initialization and Testing.

With more than 100 sets delivered and proven by the market for over 8 years, the PTA-8500A smart card personalization machine has become the mainstream SIM card personalization equipment for the most famous SIM card manufacturers in China and even in the whole world.

To meet the diversified design of banking cards and order volume, PIOTEC’s flexible personalization line FPL6081 was developed. Based on a modular design, FPL6081 smart card personalization machine can be configured with function modules including magnetic encoding, contact IC encoding, contactless IC encoding, thermal printing, embossing and indenting, topping, optical visual verification & contact IC verification & contactless IC verification, the quantity for each module can be decided by customer’s need.

PTM-120B can be integrated with short-circuit punching, open and short tests, chip initialization & pre-personalization as well as reject chip punching and marking. The brand-new design enables operators to switch chip production between 6PIN and 8PIN within 60 seconds. Modular design can meet your different production requirements and maximize your investment cost.

PTM-120B card personalization machine can be applied to contact/contactless and dual interface chip initialization and can also be customized according to the demands of various chip production.

Parameter of Smart Card Personalization and Issuing Machine

Item

Device name

Capacity

Overall dimensions

Weight

Source

Noise

Working temperature

Working humidity

Compressed air

Communication interface

PTA8500A

6000uph

3600mm×910mm×1900mm

800kg

220V(-5%~+10%) 50Hz 6KW

＜65dB

23℃±3℃

50±10%

Pressure: 0.5MpaFlow rate: 400L/min

Ethernet

PTA8500C

2500uph

3850mm×910mm×1900mm

1000kg

220V(-5%~+10%) 50Hz 6KW

Ethernet

FPL6081

2000uph

6500mm×900mm×1900mm

900kg

220V(-5%~+10%), 50Hz, 7.5KW

Pressure: 0.5MpaFlow rate: 350L/M

Ethernet

FPL6061

Pressure: 0.5MpaFlow rate: 350L/M

Ethernet

FPL6052

Ethernet

PTM120T

60,000 UPH (including broken reinforcement units);120,000UPH (6PIN, excluding broken reinforcement unit)

4750mm×840mm×1960mm (including broken reinforcement units);3800mm×840mm×1960mm (excluding broken reinforcement units)

800kg (including broken reinforcement units);650kg (excluding broken reinforcement units)

220V (-5%~+10%) 50Hz 4KW (including broken reinforcement unit);220V (-5%~+10%) 50Hz 2KW (excluding broken reinforcement units)

No air source required

Ethernet

PTCME302

33000UPH

7300mm×1200mm×2000mm

2100Kg

220V(-5%～+10%), 50Hz, 8KW

Pressure: 0.6MpaFlow rate: 1500LPM

Ethernet

PTE-S5000

5000UPH

2700mm×1250mm×1300mm

750kg

220V (-5%~+10%) 50Hz 6KW

Pressure: 0.5MpaFlow rate: 400L/min

Ethernet

PTA8500 Card Personalization Machine Typical Workflow

Workflow 1: Personalized Data Writing

Standard configuration: 32 contact IC card writing stations, 64 read and write heads, and 16 Paltec four in one contact readers PT204PT-AMA.

Scalable configuration: up to 64 card writing stations, 384 read and write heads, 96 Peltec four in one contact readers PT204PT-AMA. It can achieve data writing for standard cards, dual core, four core, or six core cards, meeting customers’ requirements for high compatibility and high production capacity.

Workflow 2: Personalized Marking

Configure 2 sets of high-speed laser marking modules.

Configure two 50W fiber laser marking machines.

Equipped with 2 smoke purifiers.

It can achieve uninterrupted laser marking, support dual laser serial and parallel marking, and can be flexibly configured according to order conditions, thereby improving marking efficiency.

Personalized Identification Process for FPL6081 Card Personalization Machine

There are many personalized identification processes for FPL6081, including flat printing, embossing, hot stamping, etc.

Thermal Printing:

Equipped with 2 sets of monochrome thermal printing modules with resolution of 300DPI, more modules can be added on requirements.

Image formats such as BMP, GIF, TIFF, PGN are available.

Embossing and Indenting:

Equipped with 3 set of embossing and indenting character modules, , more modules can be added on requirements.

Character Plate Capacity: up to 120 characters.

12 lines with 31 characters for each can be printed, and the character spacing is arbitrarily adjusted.

Conforming with ISO standard for international credit card special character.

Topping:

Golden and silver topping are supported.

Ribbon breakage and margin detection can be executed.

FAQs of Smart Card Personalization and Issuing Machine

FAQS

What is the relationship between the data writing time and production capacity of the device?

Generally speaking, if the data writing time is longer, the production capacity will relatively decrease, and there is an inverse relationship between the two. Taking PTA-8500A as an example, the relationship between data writing time and production capacity is as follows:

Capacity table

IC write capacity table (Unit: sheets/hour)

Configuration

Personalized time(s)

32 card writing station

6000

5700

5200

4200

3000

2700

Configuration

Personalized time(s)

16 card writing station

5650

4800

4100

3300

2800

2500

High speed laser marking capacity table (Unit: sheets/hour)

Configuration

Personalized time(s)

1.4

1.6

1.8

2.2

High speed laser marking

6000

4500

4100

3700

3300

2900

Note: Capacity is calculated based on the number of cards.

What are the benefits to users of the flexible performance demonstrated by the PFL series of devices?

How long does it take for PTM-120T equipment to switch between different stripe module specifications?

piotec