Stainless Steel Faucets Manufacturers Share Precautions For Faucet Replacement

role of the faucet is important in life, so we need to carry out corresponding maintenance, but what if the faucet interface leaks? Next, follow Stainless Steel Faucets Manufacturers to discuss how to deal with it.

1. Treat the water leakage from the outside: If the water is leaking from the interface of the faucet, it is generally considered to be sealed from the outside. In other words, we first need to clean the outside of the external water pipe, and wipe the leaked area with gauze or corresponding things. Then apply special glue or wrap it with raw tape. Under normal circumstances, this can be effective, except for the case of water leakage at the faucet interface.

2. Replace the water-stop tape of the faucet: If you do n’t want to remove the faucet, and have not operated according to the above method, it has not been successful. Next, you need to remove it, and then replace it with a new waterproof tape. First we have to tighten the faucet, and then use a wrench to turn the faucet counterclockwise to remove it. Secondly, we put the threaded holes outwards, and wind the tape on the threaded part of the faucet 5-6 times with clockwise tape. After completing this step, install the faucet back. Finally, turn on the switch to see if it is still leaking.

3. Replace the internal chip of the faucet: If the above two methods have not effectively dealt with the problem of faucet interface leakage, then we can only look at whether the leakage is caused by the wear of the axial gasket inside the faucet. If this is the reason, we only need to rotate the gland with pliers and then remove this gasket, and replace it with a new gasket. Under normal circumstances, the leakage of the faucet interface is relatively easy to deal with. If the faucet is really broken, then the worst situation is to replace it.

The above information is compiled by Lavatory Cabinet Manufacturers for everyone, I hope it is helpful to you.