Surface Safety Valve (SSV)
Surface Safety Valve (SSV) – API 6A Hydraulic Actuated Gate Valve
It is one type of Surface Safety valve
Product Description
Hydraulic Gate Valve | API 6A Surface Safety Valve (SSV)
Yulin Machinery’s Hydraulic Gate Valve is a fail-safe surface safety valve (SSV) that uses a hydraulic actuator to automatically shut in wellhead flow during abnormal conditions. The hydraulic actuator shares the same bonnet and gate design platform as our pneumatic actuators, allowing a hydraulic system to be converted to pneumatic operation (or vice versa) by swapping the actuator assembly alone — a practical advantage for operators standardizing spare parts across a fleet of wells.
Specifications
Valve Type
Hydraulic Actuated Surface Safety Valve (SSV)
Failure Mode
Fail-close
Closing Spring Force
900 lbs – 1000 lbs
Pressure/Vent Port
1/2″ NPT
Applicable Standards
API 6A, NACE MR-01-75
Actuator Interchangeability
Convertible to pneumatic actuation using the same bonnet platform
Available Sizes & Pressure Classes
Custom-engineered per project requirements
The Hydraulic Gate Valve is available in multiple sizes, pressure classes, and material grades to suit different wellhead and flowline conditions. Specifications vary by model and application.
Need an exact spec for your wellhead configuration? Send us your operating pressure, size, and temperature requirements, and our engineers will recommend the right configuration with a detailed datasheet.
Send Your Requirements
How It Works
Like our pneumatic actuators, the hydraulic actuator operates in a fail-close configuration. Hydraulic pressure holds the gate open against inlet pressure during normal operation. When an abnormal condition triggers a quick exhaust device, actuator pressure is released and the valve closes automatically — driven by line pressure on the stem and the compression spring. Restoring hydraulic pressure reopens the valve. An optional vent port and slam-fire system can be configured for immediate closure on gate failure.
Why Choose a Hydraulic Actuator
Hydraulic actuation is the preferred choice where a hydraulic control system is already in place on location, or where the incompressibility of hydraulic fluid is preferred for smoother, more controlled actuation response. Because the actuator assembly shares a common bonnet platform with our pneumatic designs, operators can standardize on a single valve body and switch actuation methods later without replacing the entire valve.
Design Features
– Hydraulic-to-pneumatic convertibility: Switch actuation methods by replacing only the actuator assembly — no need to replace the valve body or bonnet.
– Stem protection: Wear-resistant bearing and top seal protect the stem from metal-to-metal contact and eliminate twisting forces transmitted to the gate and seat, even with manual handwheel override in use.
– Compact compression spring design: Engineered for a smaller footprint while maintaining positive valve closure across all model sizes.
– Top plug seal assembly: Stem seal can be replaced without disassembling the actuator; integrated rod scraper keeps the sealing area clean and extends seal life.
– 360° rotatable actuator body: A bottom swivel plate at the base of the actuator allows full rotation to suit control piping requirements.













