Vibratory Polishing Machine Manufacturer Shares Maintenance Rules For Vibration Machinery

The weight of the screening machine and the amount of processing are different, and the size of the matching vibration motor is different. During the operation of the vibration motor, if the excitation force is too large, the vibration screen will be shattered due to excessive excitation force; if the excitation force is too small, the treatment effect will not be achieved, and the excitation force may be exceeded. Small and caused by the accumulation of materials blocking the network phenomenon.The manufacturer of Vibratory Polishing Machine below briefly summarizes the causes and maintenance methods of excessive vibration load of the vibration motor:First, several reasons why the vibration motor frequently trips:1. Vibration motor air switch, overcurrent protector capacity does not match or age;2. The outlet cable of the vibration motor is broken;3, bearing damage or lack of oil jam, resulting in overload trip. ;4. There is a problem with the vibration motor power supply or the aging of the circuit breaker;5. The performance of the magnetic circuit of the vibration motor is degraded, causing the current to be too large.Second, the daily maintenance of vibration machinery:1. Before starting:a. Check the coarse mesh and fine mesh for damageb. Is each set of collars locked?2. At startup:a. Pay attention to the presence or absence of abnormal noiseb. Is the power supply stable?c. Vibration is abnormal3. after use: every time you use it should be cleaned up immediately, and regular maintenance4. The motor runs for about two weeks, and it is necessary to add a timely lithium-based grease (ZL-3). Accumulative operation for 1500 hours, check the bearing, if it is damaged, replace it immediately

information about vibratory polishing machine: https://www.zhongyun-machine.com/product/vibratory-polishing-machine/