Vibratory Polishing Machine Workflow

When the surface is sprayed, there may be small defects on the surface of the paint film such as coarse grain, sandpaper mark, flow mark, white paper, orange peel, etc. In order to compensate for these defects, it is usually polished and polished after spraying to improve the paint film. The mirror effect achieves the requirements of brightness, smoothness and brilliance. Here we take a look at how the Vibratory Polishing Machine works:1. Unplug the power cord. Check the power cord for damage and leakage. Check whether the power supply and polishing machine parts are charged.2. Install a suitable polishing pad on the polishing machine.3. Sprinkle the maintenance wax on the ground through the sprayer. (Do not spray too much maintenance, otherwise the ground will fog)4. Slowly move with a sorghum polishing machine to polish the ground. (If the silver is worn, replace it in time)5, between the line and the line to overlap one third, so as not to miss the throw.6. Use the ground to remove dust.7. After using the polishing machine, remove the chassis needle holder and the scouring pad and wash it, and wipe the machine parts. Wash all the tools and put them back.8. Keep the mark until the floor is completely dry.

information about vibratory polishing machine: https://www.zhongyun-machine.com/product/vibratory-polishing-machine/