Precautions For Using Vibratory Polishing Machine

How to use Vibratory Polishing Machine correctly ?1, strong acid and alkali substances will seriously damage the machine, endangering safety. Neutral slurry must be used.2. The water box is strictly prohibited from entering the water. When placing it, please do not approach the water source.3, can not use sharp tools to stab, scratch the PU barrel. Non-professionals should not adjust the parameters of the inverter at will and disassemble the machine at will4. Before starting the machine, we must confirm that the power connection meets the requirements (must be grounded) and check that the machine is placed smoothly (adjustable four feet). Then, normal operations can be performed without an abnormal test. At any time, observe any anomalies during the operation. If there are any abnormalities, please check immediately.5. Regularly clean the sedimentation tank to keep the circulating water clean. After replacing the water, the abrasive must be added again. After using the machine, the material in the bucket should be cleaned. Turn off the power and clean the machine.6. If the machine is kept for a long time, remove the circulation pump and clean it to prevent foreign matter from clogging. The remaining material in the tank and the grinding cylinder must be cleaned and the power to the entire machine cut off.7. Do not remove the barrel cover during start-up operation to avoid damaging the machine and endangering personal safety. The barrel cover must be removed after shutdown.8. After removing the locking screw, the square bottom must be lifted when moving and disassembling the device; the rubber bucket of the device must not be moved and carried at any time to avoid the danger of vibration source!\

information about vibratory polishing machine: https://www.zhongyun-machine.com/product/vibratory-polishing-machine/