• $10000000

Stainless Steel Manual Sink Manufacturers Discusse The General Depth Of The Sink

Usually, when we install the sink, we will consider how much depth the sink needs to buy. There are different opinions. Today, Stainless Steel Handmade Sink Manufacturers will discuss the proper depth of the sink.The first one thinks that the depth of 220mm is more suitable for Chinese kitchens, because the 220mm ultra-deep water tank is vertically divided into walls, and the R10 gold has a larger radius and a larger sink space. It is more suitable for Chinese families, rear hole design, enlarged cabinet use area, and many advantages. of.The second type is considered suitable for home use. The height of the sink is 180mm or higher, which has the advantages of large capacity and splash resistance. Surface flatness: It is the most intuitive standard for checking the quality and grade of sinks. The line of sight is the same as the plane of the sink. The edges of the sink should not protrude or warp. The error is less than 0.1mm. The flatness is not good, in addition to affecting the appearance, it is also easy to cause water seepage and scaling.The third conservative is that the reasonable width of the sink is 430-480mm. Since the tank has a depth of more than 180 mm, it is suitable for preventing water splashing. The thickness of the sink should be moderate, 0.8~1.0mm is appropriate, too thin will affect the strength of the sink, too thick will affect the washing effect.The final conclusion is that the depth that is right for you is the best, so don’t use the standard to measure the depth of your needs


information about Stainless Steel Handmade Sink Manufacturers : https://www.afastainlesskb.com/product/sink/handmade-sink/