Smart Card Personalization and Issuing Machine
Smart Card Personalization and Issuing Machine
The equipments of this unit can finish data write and other personalized operations for Telecom card, Social Security Card, bank card. can finish Smart Card Sorting and Ranking, can finish chip module encapsulation and Initialization and Testing.
With more than 100 sets delivered and proven by the market for over 8 years, the PTA-8500A smart card personalization machine has become the mainstream SIM card personalization equipment for the most famous SIM card manufacturers in China and even in the whole world.
To meet the diversified design of banking cards and order volume, PIOTEC’s flexible personalization line FPL6081 was developed. Based on a modular design, FPL6081 smart card personalization machine can be configured with function modules including magnetic encoding, contact IC encoding, contactless IC encoding, thermal printing, embossing and indenting, topping, optical visual verification & contact IC verification & contactless IC verification, the quantity for each module can be decided by customer’s need.
PTM-120B can be integrated with short-circuit punching, open and short tests, chip initialization & pre-personalization as well as reject chip punching and marking. The brand-new design enables operators to switch chip production between 6PIN and 8PIN within 60 seconds. Modular design can meet your different production requirements and maximize your investment cost.
PTM-120B card personalization machine can be applied to contact/contactless and dual interface chip initialization and can also be customized according to the demands of various chip production.
Parameter of Smart Card Personalization and Issuing Machine
Item
Device name
Capacity
Overall dimensions
Weight
Source
Noise
Working temperature
Working humidity
Compressed air
Communication interface
1
PTA8500A
6000uph
3600mm×910mm×1900mm
800kg
220V(-5%~+10%) 50Hz 6KW
＜65dB
23℃±3℃
50±10%
Pressure: 0.5MpaFlow rate: 400L/min
Ethernet
2
PTA8500C
2500uph
3850mm×910mm×1900mm
1000kg
220V(-5%~+10%) 50Hz 6KW
Ethernet
3
FPL6081
2000uph
6500mm×900mm×1900mm
900kg
220V(-5%~+10%), 50Hz, 7.5KW
Pressure: 0.5MpaFlow rate: 350L/M
Ethernet
4
FPL6061
Pressure: 0.5MpaFlow rate: 350L/M
Ethernet
5
FPL6052
Ethernet
6
PTM120T
60,000 UPH (including broken reinforcement units);120,000UPH (6PIN, excluding broken reinforcement unit)
4750mm×840mm×1960mm (including broken reinforcement units);3800mm×840mm×1960mm (excluding broken reinforcement units)
800kg (including broken reinforcement units);650kg (excluding broken reinforcement units)
220V (-5%~+10%) 50Hz 4KW (including broken reinforcement unit);220V (-5%~+10%) 50Hz 2KW (excluding broken reinforcement units)
No air source required
Ethernet
7
PTCME302
33000UPH
7300mm×1200mm×2000mm
2100Kg
220V(-5%～+10%), 50Hz, 8KW
Pressure: 0.6MpaFlow rate: 1500LPM
Ethernet
8
PTE-S5000
5000UPH
2700mm×1250mm×1300mm
750kg
220V (-5%~+10%) 50Hz 6KW
Pressure: 0.5MpaFlow rate: 400L/min
Ethernet
PTA8500 Card Personalization Machine Typical Workflow
Workflow 1: Personalized Data Writing
Standard configuration: 32 contact IC card writing stations, 64 read and write heads, and 16 Paltec four in one contact readers PT204PT-AMA.
Scalable configuration: up to 64 card writing stations, 384 read and write heads, 96 Peltec four in one contact readers PT204PT-AMA. It can achieve data writing for standard cards, dual core, four core, or six core cards, meeting customers’ requirements for high compatibility and high production capacity.
01
02
Workflow 2: Personalized Marking
Configure 2 sets of high-speed laser marking modules.
Configure two 50W fiber laser marking machines.
Equipped with 2 smoke purifiers.
It can achieve uninterrupted laser marking, support dual laser serial and parallel marking, and can be flexibly configured according to order conditions, thereby improving marking efficiency.
01
02
Personalized Identification Process for FPL6081 Card Personalization Machine
There are many personalized identification processes for FPL6081, including flat printing, embossing, hot stamping, etc.
Thermal Printing:
Equipped with 2 sets of monochrome thermal printing modules with resolution of 300DPI, more modules can be added on requirements.
Image formats such as BMP, GIF, TIFF, PGN are available.
Embossing and Indenting:
Equipped with 3 set of embossing and indenting character modules, , more modules can be added on requirements.
Character Plate Capacity: up to 120 characters.
12 lines with 31 characters for each can be printed, and the character spacing is arbitrarily adjusted.
Conforming with ISO standard for international credit card special character.
Topping:
Golden and silver topping are supported.
Ribbon breakage and margin detection can be executed.
FAQs of Smart Card Personalization and Issuing Machine
FAQS
What is the relationship between the data writing time and production capacity of the device?
Generally speaking, if the data writing time is longer, the production capacity will relatively decrease, and there is an inverse relationship between the two. Taking PTA-8500A as an example, the relationship between data writing time and production capacity is as follows:
Capacity table
IC write capacity table (Unit: sheets/hour)
Configuration
Personalized time(s)
17
18
20
25
35
40
32 card writing station
6000
5700
5200
4200
3000
2700
Configuration
Personalized time(s)
9
10
12
15
18
20
16 card writing station
5650
4800
4100
3300
2800
2500
High speed laser marking capacity table (Unit: sheets/hour)
Configuration
Personalized time(s)
1
1.4
1.6
1.8
2
2.2
High speed laser marking
6000
4500
4100
3700
3300
2900
Note: Capacity is calculated based on the number of cards.
What are the benefits to users of the flexible performance demonstrated by the PFL series of devices?
How long does it take for PTM-120T equipment to switch between different stripe module specifications?
