Stainless Steel Handmade Sink Manufacturers Introduces The Characteristics Of Handmade Sinks

Many people have just heard of manual sinks, but I don’t know much about it. Today, Stainless Steel Handmade Sink Manufacturers will share unique details about manual sinks.

The hand-made sink is made of 304 stainless steel, which is basically the same as a normal sink.

Each finished product of the manual sink must be handcrafted 25 times and 72 hours. Snap-on spot welding, R-type spot welding, etc., every detail is inseparable from the electrician’s rich experience and meticulous operation.

The thickness of the manual sink is generally about 1.3 mm – 1.5 mm. This thickness facilitates soldering, uniform thickness, and no stretching of the water tank is too thin. This thickness is not possible by stretching the water tank because the greater the thickness, the greater the required punching force. If it is 1.2 mm, a 500-ton punch will not help.

How to judge the advantages of the manual sink:

1. Solder tight, no solder joints. Welding quality is one of the most critical factors affecting the life of the tank. Good soldering to prevent original embroidery and desoldering. This is a double slot.

2. The general sink needs to have an overflow device, the surface looks fine and the good sink has a more beautiful pattern as the design of the overflow hole.

3. Environmental sanitation, easy to clean, good flatness. The most intuitive standard for determining quality and grade is the gloss, oil and no smudge after washing in the pot. Material antifouling is a top priority when purchasing a sink.

4. The water pipe is leakproof, and the accuracy of the fitting is the same as the accuracy of the water tank. With PVC material, the life of the tank is the same as the life of the tank.

5. The thickness of the general manual sink is 1.0~1.5mm, and the mass is 1.2mm.

information about Stainless Steel Handmade Sink Manufacturers : https://www.afastainlesskb.com/product/sink/handmade-sink/