Stainless Steel Handmade Sink Manufacturers Share The Correct Handling Of Sink Scratches

Although stainless steel sinks are made of durable materials, scratches are unavoidable. The good news is that non-toxic cleaners remove minor scratches and have a special wet sanding technique that can better handle more severe scratches. Complete removal of deep scratches may not be possible. Removing scratches is a slow and steady process, but with a little patience and elbow grease, you can make your sink look new again. Stainless Steel Handmade Sink Manufacturers is here to tell you how to deal with different scratches.First, a slight scratch1. Rinse the sink with warm water. Place the stopper in the drain and fill the sink with warm water and a liquid detergent mixture. Immerse the sponge in water and clean the sink, paying special attention to areas where dirt and grease build up.2. Remove the stopper and let the water drain. Rinse the sink with water to remove soapy water. Inspect the sink and use a clean sponge to wipe any areas that may be missed. Dry the sink with a clean, lint-free towel and note the location of the scratches.3. Pour a small amount of liquid abrasive cleaning product onto a soft scouring pad. Make sure the cleaning product is suitable for stainless steel.4. Rub back and forth on the scratches and blend them into the surrounding sink area. Use mild pressure to rub in the grain direction if there are particles in the stainless steel. Wipe this area from time to time to check if the scratches fade or disappear. Several applications of detergents may be required. Stop after achieving the desired effect.5. After removing all scratches, clean the sink. Use warm water, liquid detergent and a clean sponge. Dry the sink thoroughly with a clean towel. If you want more gloss, use a stainless steel sink to polish and follow the instructions on the package.Second, serious scratches1. Rinse the sink with warm water. Place the stopper in the drain and fill the sink with warm water and a liquid detergent mixture. Immerse the sponge in water and clean the sink, paying special attention to areas where dirt and grease build up.2. Remove the stopper and let the water drain. Rinse the sink with water to remove soapy water. Inspect the sink and use a clean sponge to wipe any areas that may be missed. Dry the sink with a clean, lint-free towel and note the location of the scratches.3. Stick 1,000 mesh sandpaper to the rubber sanding block. Fill a small bucket with clean, warm water. Dip the sanding block into the bucket and let the sandpaper absorb moisture. Under constant pressure, the wet sand scratches the area. Rub back and forth and follow the direction of the grain. Frequently rewet the sanding block and check the area frequently to see if the scratches fade.4. If there is no sign of improvement, stick the 600 mesh sandpaper to the rubber sanding block. Repeat the wet scrub until the scratches disappear.

information about Stainless Steel Handmade Sink Manufacturers : https://www.afastainlesskb.com/product/sink/handmade-sink/